Description
To use:
- Measure length required allowing 50mm overlap. Cut off with snips.
- Feed the banding into the buckle and bend 25mm under the buckle.
- Feed free end around workpiece and into the buckle slot. Insert screw.
- Tighten with a screwdriver.
| Diameter – mm | Length of banding required – mm (inc 50mm for attaching to lock) |
No of pull outs (150mm) required to nearest 1/4 |
|---|---|---|
| 100 | 364 | 2.5 |
| 150 | 521 | 3.5 |
| 200 | 678 | 4.75 |
| 300 | 992 | 6.75 |
| 500 | 1620 | 11 |
| 800 | 2562 | 17.25 |
| 1000 | 3190 | 21.5 |