Description
IMPORTANT NOTICE: Please allow 4–5 working days for delivery.
In addition to our standard range of High Tensile (self-colour) Holding Down Bolts, we also supply sets in Stainless Steel grade A2/304.
Unlike a single forged bolt, this design uses a fully threaded shank that we weld to a plate-retaining square section and a large threaded square head. As a result, you can easily cut the bolt down to suit your specific requirements. We offer these bolts in lengths of up to 1400 mm.
For further information please contact us.
To install, place the waxed cardboard void former over the bolt so it stands on the plate washer. Leave the cone in position while the concrete sets; this allows lateral, circular movement of the bolt during alignment. Consequently, you can position the above-ground structure more easily. Once aligned, fill the void with grout.
Comprises:
1 x bolt (Stainless steel grade A2/304), nut and round washer
1 x square plate washer
1 x waxed cardboard cone
PLEASE NOTE: These ‘sets’ are supplied as individual components.
| Bolt Size
(Thread Size x Length) |
Cone Length | Sq. Hole Plate Washer
(Square x Thickness) |
|---|---|---|
| M16 x 300mm | 229mm | 100mm x 10mm |
| M16 x 375mm | 305mm | 100mm x 10mm |
| M16 x 450mm | 380mm | 100mm x 10mm |
| M16 x 600mm | 535mm | 100mm x 10mm |
| M16 x 900mm | 760mm | 100mm x 10mm |
| M20 x 300mm | 229mm | 100mm x 10mm |
| M20 x 375mm | 305mm | 100mm x 10mm |
| M20 x 450mm | 380mm | 100mm x 10mm |
| M20 x 600mm | 535mm | 100mm x 10mm |
| M20 x 900mm | 760mm | 100mm x 10mm |
| M24 x 375mm | 305mm | 100mm x 10mm |
| M24 x 450mm | 380mm | 100mm x 10mm |
| M24 x 600mm | 535mm | 100mm x 10mm |
| M24 x 900mm | 760mm | 100mm x 10mm |